Troubleshooting your Aspire Breeze NXT vape device?
If you own the Aspire Breeze NXT kit this page will assist you to troubleshoot many of your potential problems. Here are some of the most common issues with the Aspire Breeze NXT kit and ways you can troubleshoot them.
Faint or Absent Vapor Production
- Symptom: The device generates little to no vapor.
- Potential Remedies:
- Battery Level Verification: Make sure the device is sufficiently powered. Plug it into a power outlet using the supplied USB cable and charge until the LED indicator signals a full charge.
- Coil Connection Examination: Confirm that the coil is correctly fitted in the pod. Detach the pod, cleanse the coil contacts, and securely reinsert it.
- Coil Replacement: If the coil is aged or worn out, consider swapping it with a fresh one. Coils have a finite lifespan and may require replacement for optimal vapor production.
- Airflow Adjustment: Tinker with different airflow settings to strike the perfect balance for vapor production.
Burnt or Dry Hits
- Symptom: The vapor exudes a burnt or dry taste.
- Potential Remedies:
- Coil Priming: Prior to using a new coil, prime it by drenching the wicking material with e-liquid. Let the coil sit for a few minutes to ensure thorough saturation and avoid dry hits.
- Wattage Reduction: High wattage settings can cause the coil to overheat, resulting in a burnt taste. Dial down the wattage to a level that aligns with your coil resistance and vaping preferences.
- E-Liquid Level Verification: Ensure the pod is filled adequately with e-liquid. Vaping with low e-liquid levels can lead to dry hits.
- Coil Replacement: If the coil is aged or burnt, consider swapping it with a fresh one to eradicate the burnt taste and enhance vapor quality.
Pod Leakage
- Symptom: E-liquid is seeping from the pod.
- Potential Remedies:
- O-Ring Inspection: Check the pod’s O-rings for any damage or misalignment. Swap any damaged O-rings to ensure a proper seal and prevent leaks.
- Pod Tightening: Make sure all pod components are firmly fastened together. Over-tightening can damage the O-rings and cause leaks.
- Appropriate Filling: Refrain from overfilling the pod, as it can lead to leaks. Fill the pod just shy of the maximum fill line to prevent excessive pressure buildup.
- Coil Missing or Misaligned: Ensure the coil is installed correctly and securely to prevent leaks. Misaligned or missing coils can cause leakage, especially if the device is laid sideways.
- Cracked Glass: Check for cracks in the glass tank, as even small fractures can lead to leaks. Avoid exposing the device to freezing temperatures to prevent glass damage.
- Drawing Too Quickly: Avoid taking fast, hard draws from the device, as this can pull e-liquid into the airflow chambers and cause leaks. Opt for slow, steady draws instead.
- Prolonged Storage: Empty the tank if you’re not planning to use the device for more than 24 hours to prevent e-liquid saturation and leaks.
- Flying: Before flying, ensure the tank is empty to prevent leaks due to changes in air pressure.
- Overheating: Avoid leaving the device in a hot car or direct sunlight, as overheating can cause e-liquid to expand and leak through the o-rings or airflow holes.
- Freezing: Store the device in moderate temperature conditions to prevent plastic parts from becoming brittle and susceptible to leaking in freezing temperatures.
Device Fails to Power On
- Symptom: The device doesn’t turn on.
- Potential Remedies:
- Battery Connection Verification: Ensure the battery is correctly inserted and making contact with the device. Cleanse the battery contacts if necessary for a good connection.
- Battery Charging: If the battery is drained, plug the device into a power outlet using the supplied USB cable and charge until the LED indicator signals a full charge.
- Battery Replacement: If the battery is damaged or defective, consider swapping it with a fresh one.
Auto-Draw Feature Inactive
- Symptom: The auto-draw feature doesn’t activate.
- Potential Remedies:
- Airflow Verification: Make sure the airflow vents are clear and not blocked. Obstructed airflow can prevent the auto-draw feature from activating.
- Device Cleaning: Thoroughly clean the device to remove any dirt or debris that might be affecting the airflow sensors.
- Settings Adjustment: Check the device settings to ensure the auto-draw feature is enabled. Consult the user manual for instructions on how to adjust the settings.
Firing When Not in Use
- Possible Causes and Solutions:
- Unit Left On: Ensure the device is turned off when not in use by clicking the button five times in a row. This will prevent it from accidentally firing.
- Upside-Down Position: Avoid leaving the device in an upside-down position for prolonged periods, as this may cause it to auto-fire. Keep the unit upright to prevent this issue.
- Overfilling: If the device was overfilled, e-liquid might have entered the compartment below the pod, leading to auto-firing. Clean this area thoroughly with a quality paper towel and consider placing the device in rice overnight to absorb any excess moisture.
- Contact Manufacturer: If the issue persists, consider returning the device to the vape shop you purchased it from or contacting Aspire directly for assistance.
I need replacement parts for my Aspire Breeze NXT?
Canada Vapes offers replacement kits, coils, and pods for your Aspire Breeze NXT Pod System. We are the oldest and best Online Vape shop in Canada. Since 2010, we have been selling top-quality vape products to Canadians with over 40,000+ satisfied customers. You can’t go wrong at Canada Vapes!
Alternatively, you can contact Aspire directly at service@aspirewarranty.com if you are in the USA, and service@aspirecig.com outside of the USA, and their service team will help you out.
Do you have any additional troubleshooting tips or problems with your Aspire Breeze NXT? If so, please contact us and we would be happy to help you, and add your issue to our Aspire Breeze NXT Troubleshooting guide!
Please check out our Aspire Breeze NXT Reviews, and User Manual.
